Simple Light Sensor Alarm circuit with NE555
Occurring this circuit sent out an alarm when its LDR sensor is exposed to light by sun or lamp. A 555 stable multivariate was used here which sent signal a tone of about 1kHz upon detecting light.The sensor when exposed by light completes the circuit and makes the 555 oscillate at about 1kHz with transistor to drive current.
The sensor is also shown in the circuit diagram. It has to placed making an angle of about 30 – 45 degrees to the ground.
Sensitivity can be adjust with P1.
This makes the sun light to flow through it to the ground and prevents the alarm from going on due to the stored light on the sensor
This makes the sun light to flow through it to the ground and prevents the alarm from going on due to the stored light on the sensor
No comments:
Post a Comment